LEGO® Display Ideas: Shelves, Walls and Cases for Every Kind of Collection

Brick-built models on shelves and in a wall case in a living room

The short answer

Put your sets between waist and eye height, out of strong sunlight, with room around each build. Keep the ones you care about most behind acrylic, in a case or behind a clear window, so the dust never lands.

LEGO® display ideas

  • Measuring an alcove for a display

    Start with the space, not the shelf

    Stand where a visitor would stand and look at where the display will go. A set at eye level gets looked at every day, a set on the floor gets kicked, and a set on a wardrobe gets forgotten. Keep sets out of strong sunlight, which fades bricks over time, white pieces first.

  • Measuring the depth of a brick-built model on a shelf

    Choose a deep shelf

    Many large sets are deeper front to back than a paperback, so measure your biggest set before you choose a shelf. Floating shelves suit a row of smaller builds, and a bookcase lets you give each shelf a theme.

  • Brick-built models spaced along floating shelves

    Leave room around each build

    A set with space around it looks like a display, and a packed shelf looks like storage.

  • A cube shelf with clear windows over the models

    Frame builds in a cube unit

    Each cube of an IKEA KALLAX or EKET frames a build like a small stage. A clear window on the front keeps the dust out and slides out when you change the scene. We make windows for KALLAX and EKET, and the Custom Size Window Builder cuts one for a unit from any other shop.

  • Four wall cases of brick-built models in a grid

    Use the wall

    A wall case screws flat to the wall through its back panel. It suits builds that look best from the front, such as helmets, a mosaic or a building facade. A grid of cases the same size looks planned, even if the collection grew one set at a time.

  • Dusting a brick-built model with a soft brush

    Stop the dust landing

    Dust settles into every stud, so a case or a clear window is the easiest fix: you only wipe the outside. For open shelves, a soft make-up brush lifts dust out of the gaps. Work from the top down, every couple of weeks.

Designing a case on screen next to a brick-built model

A case made to the size of the set

  • Type in the size of your build, or the LEGO set number and check the size the builder suggests. The case appears on screen in 3D, so you can spin it round and try background colours before anything is cut.
  • Choose a clear or black back, and a screw-on or magnetic front. Add an arch riser for the hero of the set, a three-tier stand, or an engraved clear plaque.
  • We cut every panel and dispatch your case within two working days, flat packed with a numbered sticker on every part and a printed guide. There is no glue, and a small screwdriver is the only tool you need.
Design your case

Display ideas for the rest of the collection

The same case builder works for anything you can measure.

  • Vinyl figures and models: measure the widest, deepest and tallest points, and the builder adds a little room.
  • Graded cards: a card stand holds a graded card upright.
  • Records: a record stand holds a 7, 10 or 12 inch record in its sleeve.
  • Books and boxed figures: an easel tilts them towards the room.

We also make cases designed for particular sets, including the Game Boy, Wallace and Gromit and The X-Files.

Questions

How do you display LEGO sets without them getting dusty?

Put the sets you care about most behind acrylic, either in a case or behind a clear window on the front of a shelf or cube, and brush the open shelves every couple of weeks with a soft make-up brush.

How do I display LEGO in an IKEA unit?

Give each cube or shelf one theme or one large set, leave space around each build, and put a clear window on the front of the cubes that hold finished builds. We make windows for KALLAX and EKET, and the Custom Size Window Builder cuts one to fit any other unit.

What size case do I need?

Measure the build at its widest, deepest and tallest points, including anything that sticks out, and type those into the case builder, which adds a little room around it for you. For a LEGO set, type the set number and check the size the builder suggests.

Can I put things other than LEGO in a Ninth Panel case?

Yes. If you can measure it, the Custom Size Case Builder can make a case for it, including figures, models, graded cards, records and books.

Will it arrive before Christmas?

We dispatch within two working days. For UK delivery before Christmas, order by Wednesday 16 December for Royal Mail Tracked 48 or by Monday 21 December for Special Delivery. UK delivery is free on orders of £150 or more.