KALLAX Inserts: How to Choose One, and How to Turn a Cube into a Display

A KALLAX insert turns an open cube into something more useful, whether that is a drawer for loose bricks, a box for cables or a clear window that keeps the dust off a finished build, so the right insert depends on what the cube is for.

An Astro Bot figure, a racing helmet and a racing car on display inside a white KALLAX cube behind a clear acrylic window

The short answer

For things you want to hide, such as loose bricks, instructions or cables, choose a drawer, a box or a basket. For things you want to see, such as a finished LEGO® set, figures or a model, choose a clear display window, which slides into the cube, keeps the dust off and leaves the whole build in view.

The types of KALLAX insert

Every KALLAX cube can stay open or take an insert, and inserts fall into two groups: the ones that hide what is inside and the ones that show it off.

  • Drawers. IKEA makes KALLAX inserts with drawers, which suit small, loose things such as bricks sorted by colour, minifigure parts or craft supplies.
  • Solid fronts. IKEA also makes the KALLAX insert with door, which has a solid front that opens and suits anything you want out of sight, such as cables, games or paperwork.
  • Boxes and baskets. A box or basket slides out whole, so it suits things you take out often, such as toys or a box of sets waiting to be built.
  • Clear display windows. A crystal clear acrylic window slides into the cube and closes the front, so whatever is inside stays on show and the dust stays out.

Each insert fills the whole opening of a cube, so one cube takes one insert, and a cube with a drawer in it cannot take a window as well.

A clear window for a display cube

We designed the Crystal Clear Display Window for IKEA KALLAX for the cubes that hold finished builds. It slides into one cube and holds itself in place with a close fit, so nothing is screwed or stuck to your KALLAX, and stainless steel cubes lock each corner of the window square. One pull on the clear tab at the front slides the window out when you want to restage the scene, and it slides back in again afterwards.

A finger pulling the clear tab on the front of a KALLAX display window, with a LEGO racing car behind it

One window closes the front of the cube, which keeps everyday dust, fingerprints and paws off the front and both sides of your build, while the back stays open so you can reach in. For a cube closed on every side, fit a second window at the back facing the other way. The window is thin, so it takes very little of the cube's depth and leaves the rest for your set.

Each window comes as a kit with everything except a small screwdriver, and it takes about ten minutes to put together. It is a display window rather than an airtight or lockable case, and it is in stock, so it leaves us within two working days. Each window costs less the more you add, more than 15% off each from 16 windows, which suits a whole row of cubes or the front and back of the same cube.

Which insert goes where

What the cube holds The insert that suits it
Loose bricks, parts and instructions Drawers, or boxes you can lift out
Things you want out of sight An insert with a solid front
Toys and things you use every day A basket or an open cube
Finished LEGO® sets, figures and models A clear display window
A build you want to see from both sides A clear window at the front and another at the back

KALLAX ideas for a collection

  • Display at eye level, storage below. Put your finished builds in the cubes between your waist and your eyes, give those cubes windows, and use the lower cubes for drawers and boxes of loose bricks.
  • One build or one theme per cube. Each cube frames what is inside it like a small stage, so a single large set or a group of builds from one theme looks planned rather than crowded.
  • A room divider you can see through. A KALLAX standing in the middle of a room is seen from both sides, so a window at the front and the back of a display cube shows the build to both halves of the room.
  • A checkerboard of open and closed. Alternate display cubes with storage cubes across the unit, so the windows stand out and the storage disappears.
  • The rest of the collection. A window works for anything that fits inside the cube, from figures and model cars to a helmet or a signed ball. For more ideas, see our guide to LEGO® display ideas.
The LEGO X-Files set on display in a KALLAX cube behind a clear acrylic window

Inserts for IKEA EKET

EKET is IKEA's cabinet range, and its openings take inserts in the same way. The Crystal Clear Display Window for IKEA EKET fills one opening of an EKET Cabinet or one compartment of an EKET Cabinet with 4 compartments, so you choose your unit on the page and order one window for every opening you want to close. Like the KALLAX window, it holds itself in place, so nothing is screwed or stuck to the cabinet.

Cube units and shelves from other shops

Plenty of cube units and bookcases are not KALLAX or EKET, and their openings come in every size. For those, the Custom Size Window Builder cuts a clear window to the opening you measure. You type in the inside width, height and depth, choose 3 mm or 5 mm acrylic, add dividers if you want bays along a long shelf, and watch the window and its price change on screen. We cut it and dispatch it within two working days, with a printed guide written for your sizes.

A steel corner cube fixing a clear acrylic window inside a white KALLAX cube

You can see every window we make in our IKEA display solutions.

Questions

Do KALLAX inserts fit every KALLAX?

Our KALLAX window fits one cube on the current KALLAX range. If your shelf is older or has been changed, measure the opening first and send us the sizes at support@ninthpanel.com, and we will tell you whether it fits.

Does the window attach to the shelf?

No. It holds itself in place with a close fit, so nothing is screwed or stuck to your KALLAX, and you can move it to another cube whenever you like.

Does it keep all the dust out?

One window keeps everyday dust off the front and sides of your build, so you dust far less often. A second window at the back closes the cube on every side. It is a display window, not an airtight case.

Can I use a window and a drawer in the same cube?

No. A window fills the whole opening of the cube, so it cannot share a cube with a drawer, a basket or another insert.

How quickly does it arrive?

Every order leaves us within two working days. UK delivery is £5.99 with Royal Mail Tracked 48 and free on orders of £150 or more. For Christmas, order by Wednesday 16 December for Tracked 48 or by Monday 21 December for Special Delivery.

Can I return it?

Yes. You have 14 days to change your mind about a KALLAX or EKET window. A window from the Custom Size Window Builder is cut to your sizes, so we cannot take it back if you change your mind, but if anything arrives damaged, faulty or not as described, we make it right.

See the KALLAX window