Choosing an acrylic display case comes down to two things: a size that fits your item with a little room to spare, and a build that shows it the way you want to see it. This guide takes each choice in turn, from measuring the item to the back, the base and the front of the case.

The short answer
Measure your item at its widest, deepest and tallest points, including anything that sticks out, and allow a little room around it. If no ready-made size fits, have a case made to measure. Then choose a clear back to see every side or a black back to make colours stand out, and a front that screws shut or lifts off on magnets.
Acrylic or glass?
Acrylic, often called Perspex in the UK, is a clear plastic sheet. It is lighter than glass and less likely to shatter, which matters when a case sits on a high shelf or hangs on a wall. Some sellers call it an acrylic display box or a clear display case, and the choices below are the same whichever name you search for.
How to measure for a display case
Measure the item at its widest, deepest and tallest points, and include anything that sticks out, such as an arm, a wing or the edge of a stand. If the item sits on a stand, measure it standing on that.
Then allow a little room on every side, so the item goes in without scraping and does not look squeezed behind the front. Measure the place the case will go as well, such as the depth of the shelf and the height under the shelf above it.
Off-the-shelf sizes or made to measure
Ready-made cases come in a set range of sizes. If your item matches one, that is the quick answer. If it falls between two sizes, a ready-made case either leaves the item lost in empty space or will not take it at all.
A made to measure case is cut to the sizes you give. In our Custom Size Case Builder, you type in the size of your item and the builder adds a little room around it for you. The case appears on screen in 3D, so you can spin it round and try it against a few background colours, and the price changes with every choice you make. Custom cases start from £30, and you can email the design to yourself to think it over.
You can also design a case to slide into a cube shelf, to sit on top of a bookcase or to line up with cases you already own, and order several of the same size for a matching row.
How the case is held together
Look at how a case is put together before you buy, because it decides whether the case can come apart again. In our custom cases, a small steel cube sits in each inside corner and the panels screw to it. There is no glue, so the case comes apart again if you move. When you compare cases from other sellers, ask how theirs is assembled.
The back and the base
The back panel decides what you see behind the item.
- A clear back lets the item be seen from every side, which suits a case on a sideboard or a table that people walk round.
- A black back makes colours stand out, which suits a case against a wall.
In our builder you choose the walls and the base as well as the back. A black base, like the ones in the photos on this page, sets the item apart from the shelf it stands on.
The front: screwed on or held by magnets
Think about how often you will open the case. A front screwed to the corner cubes gives a case that stays shut, which suits an item you rarely handle. A front held on by magnets lifts off by hand, which suits a collection you swap around.

On a wall, on a shelf or stacked
- On the wall. A wall case screws flat to the wall through its back panel, which keeps a collection at eye level and leaves the shelves free.
- On a shelf. Design the case to slide into a cube shelf or to sit on top of a bookcase.
- Stacked. A stackable case has magnets in its top and its base, so the next case of the same size snaps on top as the collection grows.
To close a whole cube or shelf instead, our display window for KALLAX slides into one cube, and the Custom Size Window Builder cuts a window to a bookcase or alcove shelf you measure. Our guide to KALLAX inserts covers the options.
Accessories inside the case
In the builder you can add any of these inside the case:
- Ledges to hold a row of items on each level.
- An arch riser to lift a hero item above the rest.
- A three-tier stand so the items at the back can be seen over the ones in front.
- An easel that tilts a book, a slab or a boxed figure towards the room.
- A card stand that holds a graded card upright.
- A record stand that holds a record upright in its sleeve with the disc slid half out. The builder tells you the case size for a 7, 10 or 12 inch record.
- An engraved clear plaque with your own words.

How to care for an acrylic display case
Wipe the acrylic with a soft, dry microfibre cloth. A closed case keeps most of the dust off the item, so the outside panels are usually all that need a wipe. If your case has a magnetic front, lift it off when you want to reach the item or clean inside.
How your case arrives
We cut every panel and dispatch your case within two working days. It arrives flat packed, with a numbered sticker on every part and a printed step-by-step guide, and a small screwdriver is the only tool you need.
UK delivery is £5.99 by Royal Mail Tracked 48, free on orders of £150 or more, or £10.99 by Special Delivery for the next working day after dispatch. Each case is cut to your sizes, so we cannot take it back if you change your mind, but if it arrives damaged, faulty or not as you designed it, we make it right.
Questions
Is acrylic or glass better for a display case?
Acrylic is lighter than glass and less likely to shatter, so it suits a case on a high shelf or on a wall.
How do I clean an acrylic display case?
Wipe it with a soft, dry microfibre cloth. On a closed case you usually only need to wipe the outside panels.
What size display case do I need?
Measure your item at its widest, deepest and tallest points, including anything that sticks out and any stand it sits on, then allow a little room on every side. Our builder adds that room for you.
Can I get a display case made to measure?
Yes. Our Custom Size Case Builder makes a custom acrylic display case to the sizes you type in, from £30 with UK delivery, and we dispatch within two working days.
Will my case arrive before Christmas?
For UK delivery before Christmas, order by Wednesday 16 December for Royal Mail Tracked 48 or by Monday 21 December for Special Delivery.
Perspex is a registered trademark of Perspex International Ltd.