Display case only, LEGO® set not included.

Display case for LEGO® set 76178

Daily Bugle Display Case

Price£95

The Daily Bugle is the newspaper where Peter Parker sells his photos of Spider-Man, and the LEGO® Marvel tower has heroes and villains on every floor. Our case is made to measure for set 76178, sized from its published dimensions, tall and slim with room above the roof. It arrives flat with a printed guide and a numbered sticker on every part, and we dispatch it within two working days.

Made to order

Dispatched within two working days, with UK delivery free on orders of £150 or more.

Delivery and returns

We cut your case to order and dispatch it within two working days. UK delivery is free on orders of £150 or more, and checkout shows you the delivery price for your case before you pay.

Every custom case is cut to the sizes you choose, so we can’t take it back if you change your mind, but if it arrives damaged, faulty or not as you designed it, we make it right. Delivery and returns details

For Christmas delivery in the UK, order by Wednesday 16 December for Royal Mail Tracked 48, or by Monday 21 December for Special Delivery.

Case features

Sized for set 76178

Measured from LEGO’s published size, with room to breathe on every side.

Clear and steady

3 mm clear walls and a solid black base, made to measure for your set.

Made to order

Cut for you and dispatched in two working days.

Labelled to the last part

A sticker on every part and a printed guide made for your case.

Four steps

From set number to shelf.

You bring the set and we do the measuring, the maths and the cutting, then send it all in one box.

  1. We check the size twice

    We take your set’s size from LEGO.com and check which way round it sits, so we know its width, depth and height before we cut a single part.

  2. We add room to breathe

    Every case gets 20 mm of space at each side and 30 mm above the highest point, so your set slides in without catching a single piece and still looks made for the case rather than squeezed into it.

  3. We cut it to order

    Your case is cut when you order it, with a sticker on every panel, and it leaves us within two working days.

  4. You build it in an evening

    Connector cubes and screws hold every corner together, so there is no glue, and a printed guide made for your case walks you through it with nothing more than a small flat-head screwdriver.

Fancy a backdrop?

Give it a world to stand in.

A clear case lets the set do the talking, but some sets deserve a whole world behind them. We UV print artwork straight onto the back panel, the way we did for our X-Files case with its misty forest, and we would love to make one for your set.

Tell us what you would like and we will email you when it is ready. The sets people ask for most are the ones we design first.

What would you like?

We only use your email to reply about this set.

What comes in the box.

Walls and back

Clear acrylic walls 3 mm thick and a clear back, so you can see your set from every side of the room. In the builder you can choose a black back or thicker walls instead.

Front

The front is held on with screws, so it stays put while your set is on show, and the small screwdriver in the box takes it off whenever you want to dust inside.

Base

A solid black base that the whole case stands on. In the builder you can step up to a two-tier base.

How it goes together

We cut every part to order and put a sticker on each one, and a printed guide made for your case comes packed in the box, so you always know which piece goes where.

The small print

Every custom case is cut to the size you choose, so we can’t take it back if you change your mind. If your case arrives damaged, faulty or not as you designed it, email support@ninthpanel.com and we will put it right.

Display case only, LEGO® set not included. The pictures on this page are our own drawings.

LEGO® is a trademark of the LEGO Group, which does not sponsor, authorise or endorse this product. Other names on this page belong to their owners and are used only to say which set the case fits.

Asked and answered.

Will it fit my Daily Bugle?

It will, because we size the case from LEGO’s published measurements for this set and add 20 mm of space at each side and 30 mm above the highest point, so it slides in without catching a piece. The inside size is shown in the box next to the price.

Can I change the size or the parts?

You can, because the Customise this case link under Add to bag opens our case builder with this case already loaded, so you can change the walls, the back, the base or the size and watch the price change. The yellow outline of your set stays in the case as you go, so you can see it still fits before you add it to your bag.

Can I get a printed background for it?

Not on this page yet, but we would love to make one, so send us a request with the form above and we will let you know when a printed background for this set is ready.

Will you make a full design for this set?

We design full cases, with printed artwork and everything, for the sets our customers ask for most, so if you would like one for this set, send a request with the form above and it counts towards the next one we make.

Can I return a custom case?

Every custom case is cut to the size you choose, so we can’t take it back if you change your mind. If your case arrives damaged, faulty or not as you designed it, email support@ninthpanel.com and we will put it right.

One set.
One case.
Case closed.

Your case is already worked out, so you can add it to your bag right here, or open it in the builder first if you fancy a black back, a two-tier base or a different size.

Add it to your bag